You have no items in your shopping cart.
$499.95 USD
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greaseable U-joints Custom made by Adams Driveshaft.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Application:
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This Rear Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 888.526.1986 after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits:
- 2 Door Driveshaft: Part# ASDJK-1310R-G2D 4 Door Driveshaft: Part# ASDJK-1310R-G4D
- Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
This Item will include the following parts as Picture up Top:
[1] 2 1/2" X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
[1] American Made 1310 Rear Dana 44 Pinion Yoke.
[1] Set of Heavy Duty 1310 U-bolts.
[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Driveshaft comes painted Gloss Black Show Quality.
CA Residents: 
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warranty Information
DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greaseable U-joints Custom made by Adams Driveshaft.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Application:
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This Rear Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 888.526.1986 after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits:
- 2 Door Driveshaft: Part# ASDJK-1310R-G2D 4 Door Driveshaft: Part# ASDJK-1310R-G4D
- Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
This Item will include the following parts as Picture up Top:
[1] 2 1/2" X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
[1] American Made 1310 Rear Dana 44 Pinion Yoke.
[1] Set of Heavy Duty 1310 U-bolts.
[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Driveshaft comes painted Gloss Black Show Quality.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warranty Information
DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
Availability:
Many In Stock
Sku: ASDJK-1310R-G2D
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greaseable U-joints Custom made by Adams Driveshaft.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Application:
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This Rear Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 888.526.1986 after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits:
- 2 Door Driveshaft: Part# ASDJK-1310R-G2D 4 Door Driveshaft: Part# ASDJK-1310R-G4D
- Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
This Item will include the following parts as Picture up Top:
[1][1][1][1][1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Driveshaft comes painted Gloss Black Show Quality.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warranty Information
DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greaseable U-joints Custom made by Adams Driveshaft.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Application:
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This Rear Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 888.526.1986 after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits:
- 2 Door Driveshaft: Part# ASDJK-1310R-G2D 4 Door Driveshaft: Part# ASDJK-1310R-G4D
- Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
This Item will include the following parts as Picture up Top:
[1][1][1][1][1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Driveshaft comes painted Gloss Black Show Quality.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warranty Information
DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
Also Purchased
![ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT GREASABLE U-JOINTS [HEAVY DUTY SERIES]](http://www.thunderoffroad.com/cdn/shop/products/ASDJK-1310F-G_JK1310FG_300x_crop_center.jpg?v=1618625040)
ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT GREASABLE U-JOINTS [HEAVY DUTY SERIES] ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT GREASABLE U-JOINTS [HEAVY DUTY SERIES]
New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft. Application: FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4...
New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft. Application: FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4...
![ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES]](http://www.thunderoffroad.com/cdn/shop/products/ASDJK-1310F-S_JK1310FS_300x_crop_center.jpg?v=1618626213)
ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES] ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES]
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft. Application: FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or...
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft. Application: FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or...
![ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 2 DOOR [EXTREME DUTY SERIES]](http://www.thunderoffroad.com/cdn/shop/products/ASDJL-1310R-S4D-SP__01083.1581725882.1280.1280_300x_crop_center.jpg?v=1624297328)
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 2 DOOR [EXTREME DUTY SERIES] ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 2 DOOR [EXTREME DUTY SERIES]
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 2 DOOR [EXTREME DUTY SERIES] Product Description New Rear Extreme Duty Jeep JL Wrangler Sport 2 Door 1310 Series CV Driveshaft with Pinion...
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 2 DOOR [EXTREME DUTY SERIES] Product Description New Rear Extreme Duty Jeep JL Wrangler Sport 2 Door 1310 Series CV Driveshaft with Pinion...
![ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 4 DOOR [EXTREME DUTY SERIES]](http://www.thunderoffroad.com/cdn/shop/products/jl-rear-measurement-chart-2_899c5fde-69be-4025-9b20-3b6c71600087_300x_crop_center.jpg?v=1624296371)
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 4 DOOR [EXTREME DUTY SERIES] ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 4 DOOR [EXTREME DUTY SERIES]
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 4 DOOR [EXTREME DUTY SERIES] Product Description New Rear Extreme Duty Jeep JL Wrangler Sport 4 Door 1310 Series CV Driveshaft with Pinion Yoke. Custom...
ADAMS DRIVESHAFT JL REAR 1310 CV DRIVESHAFT SPORT 4 DOOR [EXTREME DUTY SERIES] Product Description New Rear Extreme Duty Jeep JL Wrangler Sport 4 Door 1310 Series CV Driveshaft with Pinion Yoke. Custom...
![ADAMS DRIVESHAFT JT GLADIATOR OVERLAND FRONT 1310 CV DRIVESHAFT With OEM FLANGE STYLE [EXTREME DUTY SERIES]](http://www.thunderoffroad.com/cdn/shop/products/ASDJT-1310F-S_Polished_300x_crop_center.jpg?v=1618680091)
ADAMS DRIVESHAFT JT GLADIATOR OVERLAND FRONT 1310 CV DRIVESHAFT With OEM FLANGE STYLE [EXTREME DUTY SERIES] ADAMS DRIVESHAFT JT GLADIATOR OVERLAND FRONT 1310 CV DRIVESHAFT With OEM FLANGE STYLE [EXTREME DUTY SERIES]
Product Description New Front Extreme Duty Jeep JT Gladiator Overland 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Now that you own the Newest Generation Jeep Gladiator,...
Product Description New Front Extreme Duty Jeep JT Gladiator Overland 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Now that you own the Newest Generation Jeep Gladiator,...
