ADAMS DRIVESHAFT ASDJT-1350R-S-1PC-OVR JT GLADIATOR OVERLAND REAR 1 PIECE 1350 CV DRIVESHAFT [EXTREME DUTY SERIES] ADAMS DRIVESHAFT ASDJT-1350R-S-1PC-OVR JT GLADIATOR OVERLAND REAR 1 PIECE 1350 CV DRIVESHAFT [EXTREME DUTY SERIES]

ADAMS DRIVESHAFT ASDJT-1350R-S-1PC-OVR JT GLADIATOR OVERLAND REAR 1 PIECE 1350 CV DRIVESHAFT [EXTREME DUTY SERIES]

New 1 Piece Rear Extreme Duty Jeep JT Gladiator Overland 1350 Series CV Driveshaft. Custom made by Adams Driveshaft.

Now that you own the Newest Generation JT Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Application:

FITS A 2020 JEEP JT GLADIATOR OVERLAND ONLY.

This Extreme Duty Series 1 Piece Solid U-joint 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4 1/2" Lift, after that the angle may be too Severe and could cause a slight vibration on or off the Throttle.

Please enter Your Measurement, Year, Make, Model, and Lift Size in the notes when you check out, you can e-mail us, or call us at 888.526.21986 after you have purchased the Item. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.

PLEASE NOTE: THIS 1 PIECE DRIVESHAFT WILL NOT WORK ON HIGH PINION 60s OR ANY OTHER HIGH PINION DIFFERENTIALS. IF YOU HAVE A HIGH PINION, YOU WILL NEED TO GO WITH OUR 2 PIECE DESIGN.

Benefits for Buying an Adams Driveshaft over Others:

Rear Driveshaft Part# ASDJT-1350R-S-1PC-OVR
Made out of 3 1/2" X .083 Wall D.O.M. tubing.
Has Long 1 1/2" Full Spline Slip n Stub.
Built only with Components made by Spicer, Neapco, and Adams Driveshafts Brand.
Has the Strongest Solid Non Greaseable U-joints on the Market. You Break the U-joint by Torque we replace it.
Comes with a Forged Rear U-bolt Style Dana 44 Overland Pinion Yoke that supports the U-joint Cap Half way around unlike our Competitors.
Comes with a Solid Steel Rear transfer case Saginaw Flange yoke with Grade 10 CV Bolts.

This Item will include the following parts as Pictured up Top:

[1] 3 12" X .083 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greaseable U-joints. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.

[1] American Made Rear 1350 Saginaw Transfer Case Output Shaft Flange Yoke.

[1] American Made Rear 1350 Forged Pinion Yoke.

[1] Set of 1350 U-bolts.

[4] Grade 10 CV bolts.

[1] Adams Driveshaft T-shirt

Driveshafts come painted Gloss Black Show Quality.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

SINCE JEEP PRODUCED THIS MODEL WITH 2 DIFFERENT DIFFERENTIAL OPTIONS, WE NEED TO KNOW WHICH DIFFERENTIAL YOU HAVE BEFORE ORDERING.

BELOW IS A PICTURE OF AN M220:

BELOW IS A PICTURE OF AN M200:

WE WILL NEED A MEASUREMENT LIKE THE PICTURE BELOW SHOWS WITH THE JEEP SITTING AT RIDE HEIGHT.

Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.